English ![]()
+86-17692703999
+86-17692703999 No. 6, West Side Auxiliary Road,
Sunshine Street, Linxi County, Xingtai
City, Hebei Province
Sunshine Street, Linxi County, Xingtai
City, Hebei Province
Views: 0 Author: Site Editor Publish Time: 2025-08-06 Origin: Site
Looking to change a Loader Bushing without using your tractor? You have many choices. You can pick aftermarket, universal, or custom bushings. Many people like plastic bushings because they are light and do not rust. Some people choose composite or alloy bushings for more strength and longer use. Some bushings use self-lubricating materials, so they are easier to care for. No matter what you choose, getting the right part number and size is important. If you want your loader, excavator bushing, or bucket pin to work well, paying attention to these things saves you time and money.
Pick the loader bushing material that fits your job. Steel is strong. Bronze lasts a long time. Plastic is light. Self-lubricating types are easy to care for.
Measure your loader bushing with a caliper or micrometer. Get the inner diameter, outer diameter, and length. This helps you get the right size.
Use part numbers and guides to find the right loader bushing. If standard parts do not fit, look at custom options.
Buy from trusted suppliers. They should have good quality control. They should answer fast and help with custom orders. This keeps your loader working well.
Check your bushings and pins often for wear or damage. This helps you avoid big repairs. It also makes your equipment last longer.
When you need a new loader bushing, you have many choices. You do not have to use your tractor or only OEM parts. Let’s look at your main options. This helps you pick what is best for your loader, excavator bushing, or bucket pin.
Loader bushings can be made from different materials. Each type has its own good points:
Steel: DOM steel tubing is great for homemade bushings. It works well with 1018 steel pins. You can drill and tap these for grease fittings. This helps them move smoothly.
Bronze: Bronze bushings, like sintered bronze and graphite-impregnated bronze, last a long time. They give a smooth surface and handle heavy loads. They also do not wear out fast.
Plastic: Some people use plastics like Delrin. These are light and do not rust. But they can wear out faster if you use them a lot.
Composite and Self-Lubricating: Self-lubricating bushings use special materials like PTFE liners or solid lubricants. These bushings last much longer than regular ones. You do not need to grease them. They work well in dusty or wet places.
Tip: Self-lubricating bushings save time and money on care. They are quieter and have less friction. This helps your loader work better.
Loader bushings come in different shapes and styles:
Standard Cylindrical: These are the most common and easy to change.
Flanged: These have a lip to keep them in place. They help with side loads.
Split or Slotted: These are easy to put in and take out. You do not need to take apart the whole machine.
Lined or Coated: Some bushings have a graphite spray or manganese phosphating. This makes them slippery and stops rust.
Shanghai Fenghua (SINOTECH Machinery Co., Ltd.) uses special steps like carburizing heat treatment, manganese phosphating, and graphite spray coating. These make bushings harder and stronger. They also stop rust. You can even pick the color for a custom look.
Universal loader bushings fit many machines. They are easy to find and usually cost less than custom ones. Here is a quick chart:
Feature | Universal Loader Bushings | Custom Loader Bushings |
|---|---|---|
Compatibility | Fits many models | Made for your exact needs |
Price | Usually lower | Can be higher |
Durability | Good, but varies | High, if made well |
Availability | Easy to buy | May take time to produce |
Universal bushings are good for a quick fix or if you have many machines. You can get them from SINOTECH Machinery Co., Ltd., McMaster-Carr, or Grainger.
Sometimes, you need something special for your loader. Maybe your loader has special needs or you want it to last a long time. Custom loader bushings are the answer.
Shanghai Fenghua (SINOTECH Machinery Co., Ltd.) can make bushings just for you. You can send them a drawing or a sample. They make many sizes, from small (30mm inner diameter) to very big (300mm inner diameter). You can pick the material, surface finish, and color. Their team uses over 80 high-precision machines and checks quality. You get a bushing that fits well and lasts a long time.
Note: Custom bushings may cost more at first. But they can save you money because they last longer and stop downtime.
If you like to build things, you can make your own bushings. Use DOM steel tubing and 1018 steel pins. Drill holes for grease fittings to keep them smooth. Do not use black steel pipe because it wears out fast.
No matter what you pick, match the bushing to your loader’s needs. Think about where you use it, how much weight it holds, and how much care you want to do. The right loader bushing helps your machine run better and last longer.
Finding the right loader bushing part number can feel tricky, but you can do it step by step. Start by looking at your equipment type. Is it a loader, backhoe, or maybe an excavator? Next, check the make of your machine, like Case or another brand. Pick your specific model from the list. You will see a part number, such as D31142, that matches your loader. Always check if the part number fits your model and matches the OEM details.
Here’s a simple way to identify your loader bushing part number:
Choose your equipment type (Loader, Backhoe, Excavator).
Find the equipment make (for example, Case).
Select your loader model.
Look up the loader bushing part number listed for your model.
Double-check compatibility with OEM part numbers.
If you follow these steps, you will find the right part number for your loader bushing.
You might want to find an alternative to your OEM loader bushing. Cross-referencing helps you match part numbers with aftermarket or universal options. Many suppliers list bushings by part type, equipment, and compatible brands. This makes it easy to find what fits your loader, excavator bushing, or bucket pin.
Category | Examples / Details |
|---|---|
Part Type | Loader Bushing, Bucket Pin, Bucket Tooth, Side Link |
Compatible Equipment | Loader, Excavator, Backhoe, Skid Steer, Crawler Dozer |
Compatible Equipment Make | Case, Universal, SINOTECH Machinery Co., Ltd. |
For example, a Case-Replacement bushing matches the original specs and works just like the OEM part. You can use these tables to find the right fit for your machine.
Sometimes you cannot find the OEM part number. Don’t worry! You have options for sourcing loader bushings:
DMC Wear Parts offers aftermarket bushings for loaders, dozers, and excavators. You can search by equipment style, not just OEM numbers.
WPI stocks a wide range of aftermarket loader bushings and pins. Their inventory covers many brands and helps you reduce downtime.
SINOTECH Machinery Co., Ltd. provides custom loader bushings. You can send them your drawing or sample. They will make a bushing that fits your needs, even if you do not have an OEM part number. Their team supports custom orders and offers free industrial drawing services.
Tip: If you need a loader bushing but cannot find the part number, reach out to SINOTECH Machinery Co., Ltd. They can help you with custom solutions for loader bushings, excavator bushings, and bucket pins.
Getting the right size for your loader bushing is key if you want your machine to run smoothly. If you pick the wrong size, you might see extra wear or even damage. Let’s break down how you can measure, match, and double-check your loader bushing size—even if you don’t have the original part number.
You can measure a loader bushing at home with a few simple tools. Grab a micrometer or a caliper. These tools help you get accurate numbers. Here’s what you need to measure:
Inner Diameter (ID): This is the hole in the middle of the bushing. It should fit snugly around the pin.
Outer Diameter (OD): This is the outside edge of the bushing. It needs to fit tightly in the loader arm or housing.
Length (Height): This is how tall the bushing is from one end to the other.
To get the best fit, measure each spot in a few places. Sometimes, bushings wear unevenly. Always use the smallest measurement you find. If you want a little more grip, you can subtract a tiny bit (like 0.002 inches) from your measurement. This helps the bushing stay tight.
Tip: If you use a loader bushing for heavy work, check the fit by pressing the pin into the bushing. It should slide in with a little resistance, but not be too loose.
Here’s a quick table to help you remember the steps:
Step | What to Measure | Tool Needed | Why It Matters |
|---|---|---|---|
1. Inner Diameter | Hole in the bushing | Micrometer | Must fit the pin |
2. Outer Diameter | Outside of the bushing | Caliper | Must fit the loader arm |
3. Length/Height | End to end | Ruler | Must match loader specs |
Once you have your measurements, you need to match them to your loader’s specs. Loader bushings come in many sizes. SINOTECH Machinery Co., Ltd. supports a wide range:
Minimum size: Inner diameter 30mm, outer diameter 40mm, height 10mm
Maximum size: Inner diameter 300mm, outer diameter 350mm, height 300mm
If your loader bushing falls within these sizes, you can order a standard or custom part. Always check your loader’s manual or spec sheet. If you don’t have one, measure the pin and housing directly.
Sometimes, you may want to upgrade or replace other parts, like an excavator bushing or bucket pin, at the same time. Matching all your specs together can save you time and money.
Note: SINOTECH Machinery Co., Ltd. can make custom bushings if your size is not standard. Just send them your measurements or a sample.
Sizing charts make it easy to find the right loader bushing. You just match your measurements to the chart. Here’s a simple example:
Inner Diameter (mm) | Outer Diameter (mm) | Height (mm) | Common Use |
|---|---|---|---|
30 | 40 | 10 | Small loaders |
50 | 65 | 30 | Medium loaders |
100 | 120 | 50 | Large loaders |
300 | 350 | 300 | Heavy equipment |
If you use inches, you can convert millimeters by dividing by 25.4. For example, 50mm is about 1.97 inches.
Conversion Tip:
To convert millimeters to inches, use this formula:inches = millimeters ÷ 25.4
If you want a perfect fit, always double-check your numbers. If you are not sure, ask for help from SINOTECH Machinery Co., Ltd. They offer free drawing services and can help you match your loader bushing, excavator bushing, or bucket pin to your machine.
Ready to order? Make sure you have your measurements, check the sizing chart, and talk to a trusted supplier. This way, you get the right part the first time and keep your loader running strong.
When you want to buy a loader bushing, you have many trusted suppliers to choose from. Some of the top companies ship worldwide and offer fast service. For example, Zhejiang Myway stands out with ISO-certified factories and a strong global network. They focus on custom solutions and quick delivery, which helps keep your equipment running longer.
You can also find reliable suppliers in China’s industrial hubs. Companies like Dongguan Shuangxin Industry and Dongguan Yu Biao Hardware have years of experience and high on-time delivery rates. SINOTECH Machinery Co., Ltd. is another excellent choice. They offer loader bushings, excavator bushings, and bucket pins. You can send them your drawing or sample, and they will make a custom part just for you.
Here’s a quick look at some leading suppliers:
Supplier Name | Location | Experience (Years) | Factory Size (m²) | Response Time | On-time Delivery Rate | Online Revenue (USD) | Reorder Rate (%) |
|---|---|---|---|---|---|---|---|
Dongguan Shuangxin Industry | Guangdong, CN | 12 | 5,000+ | ≤2 hours | 97.8% | $670,000+ | 36% |
Dongguan Yu Biao Hardware | Guangdong, CN | 11 | 5,600+ | ≤2 hours | 96.4% | $620,000+ | 44% |
Dongguan Mingyi Mold Parts | Guangdong, CN | 16 | 3,500+ | ≤2 hours | 100% | $16,000+ | 38% |
Wuhu Longxing Alloy | Anhui, CN | 3 | 15,000+ | ≤1 hour | 100% | $3,900+ | N/A |
Zhejiang Myway | Zhejiang, CN | 10 | 440+ | ≤2 hours | 96.2% | $110,000+ | 26% |
You want to get the best loader bushing for your machine. Here are some tips to help you choose wisely:
Check the bushing for strong housing and no signs of damage or rust.
Make sure the supplier can match your original part’s size and shape. If you have a drawing or a sample, send it to them.
Ask about quality control. Good suppliers test their bushings to make sure they last.
Compare the cost of fixing an old bushing to buying a new one. Sometimes, a new part saves you money in the long run.
Think about how fast you need the part. Some custom orders take a few days, but others may take weeks.
Choose suppliers who offer fast response times and support for custom orders. SINOTECH Machinery Co., Ltd. can make loader bushings, excavator bushings, and bucket pins based on your needs.
Look for companies that care about the environment. Refurbishing parts can help reduce waste and save resources.
Tip: If you need a loader bushing quickly, ask about lead times before you order. Some suppliers can ship standard parts right away, while custom orders may take longer.
When you pick a supplier with global reach and strong support, you get peace of mind. SINOTECH Machinery Co., Ltd. ships worldwide and can customize parts for any loader, even if you only have a sample or drawing. This makes it easy to keep your equipment in top shape, no matter where you are.
You can find the right bushing by measuring your old parts with calipers, searching by size, and checking both metric and imperial options. Custom bushings, like those from SINOTECH Machinery Co., Ltd., let you pick the best material for your job. Here’s a quick checklist to help you succeed:
Measure and record all dimensions.
Compare specs with supplier charts.
Check for quality and fit.
Inspect pins and bushings monthly.
Choosing the right supplier and material keeps your excavator bushing and bucket pin working longer. DIY and non-OEM solutions give you more control and save money.
You can use a caliper or micrometer for this job. Measure the inside, outside, and height of the loader bushing. Always look for worn spots before writing down your numbers. This helps you get the right loader bushing or excavator bushing.
Yes, you can use universal loader bushings if the size matches. Universal bushings fit lots of different machines. If you want the best fit, custom bushings from SINOTECH Machinery Co., Ltd. are a good choice.
Send your drawing or a sample to SINOTECH Machinery Co., Ltd. Their engineers will help you pick the right size and material. You can also ask for custom bucket pins or excavator bushings.
Loader bushings can be made from steel, bronze, plastic, or self-lubricating composites. SINOTECH Machinery Co., Ltd. has many choices. Pick the material that works best for your loader and job.
Watch for extra movement, strange sounds, or worn spots. If your loader bushing or bucket pin feels loose or looks rusty, you should replace it. Checking often helps you stop bigger problems.
